| Engine Specifications |
|
| Manufacturer/Model |
Briggs & Stratton Vanguard, 2-Cyl. |
Displacement
|
34.7 cu. in. (570cc) |
| HP/RPM |
18 @ 3600 |
| Max Torque [ft-lb (N•m) @ RPM] |
29.5 (40.5) @ 2400 |
| Fuel |
Gasoline (unleaded) |
| Fuel Capacity |
3 Gallons (11.35 liters) |
| Cooling System |
Air |
| Lubrication System |
Full Pressure w/ Filter |
| Muffler |
Engine Tuned (Lo Tone) |
| |
|
| Electrical System |
|
| Battery |
12 Volt (220CCA) |
| Charging System |
12.5 Amp Flywheel Alternator |
| Ignition |
Magnetron® Electronic |
| Starter |
12 Volt Electric, Key and Solenoid Operated |
| Interlock Switch System |
Ignition Lockout by Seat Switch, Transmission Neutral and
Blade Clutch |
| |
|
| Tractor Drive |
|
| Transmission/Final Drive |
Dual, Independent Hydro-Gear® Integrated Transaxles |
| Steering |
Hand Lever Control, Individual Drive Wheel |
| Forward Speed Control |
Precision Friction Lock Lever, Cruise Control with Neutral
Park Position |
| Brake |
Dynamic Braking through Transaxles |
| Parking Brake |
Mechanical Lockout for Each Transaxle (Single Lever Control) |
| Ground Speed |
0-12 KPH Forward, 0-8 KPH Reverse, Infinitely Variable |
| Turning Radius |
Zero (0”) |
| |
|
| Mower Deck |
|
|
Cutting Width (Inches)
|
36 to 56 Side Discharge (4 Decks) or 42 Mulching |
| Cutting Height (Inches) |
1 to 4 (2.54 to 10.6 cm), ½” (1.27) Increments (12 cutting heights with optional Height Adjuster)
|
| Blade |
0.197 inch Stamped Steel, 10B38 Alloy, Tempered |
| Max Blade Speed |
2900 RPM (16700 FPM with 22” Blade) |
| Blade Drive |
Splined PTO Drive Shaft/2 High Speed U-Joints, Shear Pin for
Shock Protection on Timed Gear Drive on Deck |
| Blade Clutch and Brake |
Soft Engage Manual Mechanical Clutch/Brake |
| Deck Suspension |
Torsion-Flex Frame with Caster Wheels and Counterweight Springs |
| |
|
| Construction |
|
| Frame/Body |
3/16” Plate Steel/14 Gauge Sheet Steel |
| Mower Deck |
11 Gauge Welded Steel |
| Seat |
Contour-Molded with Nylon Backed Vinyl Cover and Integral
Foam Cushion |
| |
|
| Tire Size |
|
| Deck Caster Wheel |
Standard 2.80/2.50-4 Pneumatic (4 Ply), Optional 8.25 x 2.75
Foamed Rubber |
| Drive |
18 x 8.50-10 |
| Rear Tire |
13 x 6.50-6 |
| |
|
| Dimensions |
|
| Outside Dimensions |
40-1/2 in. (103 cm) H x 47-3/4 in. (121 cm) W x 82 in. (208
cm) L |
| Wheel Base (Tractor) |
38-1/2 in. (98 cm) |
| Tread Width (Tractor) |
28-1/4 in. (72 cm) |
|
|
| Curb Weight (Approximate) |
|
| Tractor Only |
551 lbs. (250 kg) |
| Tractor and Mower |
764 lbs. (347 kg) |
| |
|
| Compatibility |
|
| Decks |
DSD36, DSD42, DML42, DML42A, DSD48, DSD56 |
| Implements/Attachments |
Perfaerator™ & SB36A Single Stage Snowblower (requires
Kit #4300-2 when using snowblower) |
| |
|
|
Dimensions and weight shown for tractor with 42” side
discharge deck (typical) |
